USA Ed. 0215
10 • COOKING
10.1 - COOKING: NEW PROGRAMS
NOTA: if a temperature value for the core pro-
the time disappears.
This happens because it is the reaching of the
probe temperature that determines the end of
the cycle.
NOTE -
cycle is lower than that of the first, the ap-
pliance lowers the chamber temperature by
injecting cold water.
NOTE -
big difference in temperature between the 2
cycles, the temperature of the appliance may
not decrease to that required before the set
time. Using the double cycle is therefore re-
commended in case of long cooking periods.
NOTE -
the set value, steam is automatically injected
to restore it.
To Next Page
Loading...
