USA Ed. 0215
oven and place the food to be regenerated. Close the
door.
button.
After startup, the cycle number of the program
in progress will have the same colour as the
background of the icons.
are left to reach the value of the set temperature
will be superimposed by a grid, and a short beep
warns the user about the completed cycle.
beep warns the user about the completed program
while all the cycles are superimposed by a grid.
After cooking, the chamber is cooled and subse-
quently the door is unblocked to allow opening of the
oven.
NOTE:
change the set values while the device is running
changed values are stored in the local memory; to
initial values.
11.3 - REGENERATION
11 • EXTRA PROGRAMS
To Next Page
Loading...
