USA Ed. 0215
NOTE:-
automatically. This happens because the probe has
reached the temperature which results in the end of
the cycle.
oven and place the food to be cooked. Close the
door.
button.
After startup, the cycle number of the program
in progress will have the same colour as the
background of the icons.
-
will be superimposed by a grid, and a short beep
warns the user about the completed cycle.
beep warns the user about the completed program
while all the cycles are superimposed by a grid.
After cooking, the chamber is cooled and subse-
quently the door is unblocked to allow opening of
the oven.
NOTE: once the program has started, you can
change the set values while the device is running
changed values are stored in the local memory; to
initial values.
11 • EXTRA PROGRAMS
11.9 - LOW TEMPERATURE COOKING
To Next Page
Loading...
