Master Operation Mode
100
05/01 AWB2700-1384GB
Coupling with a Siemens S7
Controller
To use the type-specific com files for the S7 from Version 2.0
onwards, they must be copied into the following directory:
STEP7_V2\S7DATA\TYPDATEI.
S7 Version 1.x and the NCM for the communication processor CP
342-5 DP use GSD files.
After successful updating of the type files using menu option Extras,
they appear in the hardware catalogue of the hardware
configuration program:
They can be configured from here in the Simatic stations:
To Next Page
Loading...