Bus Connection
73
05/01 AWB2700-1384GB
5
Figure 27: Transmission cable for the connection of bus subscribers
Cable Types
For the transmission line the following cables can be used (e.g.):
Cable Type „A": FA. Moeller ZB4-900-KB1 (for inhouse
installation) 1x2x0,64
SIEMENS, Type „SINEC
®
L2 Bus Cable",
6XV 1830-0A H10
Fa. Lapp UNITRONICS-BUS FD P LZ/F.I.P.
1x2x0,25 (24 AWG)
(for highly flexible applications)
UNITRONICS-BUS Yv LZ/F.I.P.
1x2x0,64
O
(for external/below ground routing)
UNITRONICS-BUS LZ/F.I.P.
1x2x0,64
O
(for fixed routing)
Bus Connection The bus connection for
WIN
bloc eco I/O modules is made via a
tension clamp connection on the base element. The connection
assignment is explained in detail in chapter 10. Technical Data.
To Next Page
Loading...