Moeller WINbloc eco PROFIBUS-DP Series - Siemens-Control System (DOS); Example for Coupling with a Siemens Control System (IM 308 B and COM ET 200 DOS-Software)

Siemens-Control System (DOS)
89
05/01 AWB2700-1384GB
9
Siemens-Control
System (DOS)
Example for Coupling with a Siemens Control System (IM
308 B and COM ET 200 DOS-Software)
In order to use the type-specific COM files, they must be placed in
the main directory of the PU (e.g. C:\COMET200). See also the
Siemens Product Information for COM ET 200 from V 4.0 MS-DOS.
If the files are installed correctly, a list of the station types appears,
that can be opened under COM ET 200 „CONFIGURE" using F7,
extended with the follwing stations:
WIN bloc 16DI eco
WIN bloc 32DI eco
WIN bloc 16DO eco
WIN bloc 32DO eco
WIN bloc 16DI/16DO eco
The diagnostic functions are described in the manual for the
software package COM ET 200 from Siemens (chapter 11).
h
Parameterization data are not transferred, i.e. the default setting
of the DP station parameterization message: 00 00 00 00 00
must not be changed.
Before these files are copied on the computer, all files in the
target directory that begin with <WI> should be deleted.