Moeller WINbloc eco PROFIBUS-DP Series - Siemens-Control System (Windows); Example for Coupling with a Siemens Control System (IM 308 C and COM ET 200 Windows-Software)

Siemens-Control System
(Windows)
95
05/01 AWB2700-1384GB
9
Siemens-Control System
(Windows)
Example for Coupling with a Siemens Control System
(IM 308 C and COM ET 200 Windows-Software)
To use the type-specific COM files for the S5 IM308C Comet V2.x,
they must be located in the TYPDAT5X directory of the PU (e.g.
C:\COMWIN21\TYPDAT5X).
From Com Profibus 3.0 onwards, the device data set files can also
be copied into the GSD directory (e.g. C:\COMPB30\GSD). These
files will be used by Com Profibus 3.0 instead of the type files.
The files with the file extension .bmp must be copied into the
BITMAPS directory (e.g. C:\COMWIN20\BITMAPS).
When the files are correctly installed, the list of the station types/
type files that can opened in COM ET 200 documentation appears.
When the type files in the TYPDAT5X directory are used, the list is
extended by the following entries.
The files for the PROFIBUS-DP modules of the
WIN bloc family are
also copied into the list.
Family Station Type Type File
WIN bloc WIN bloc 16 DI eco WI0221AX.200
WIN bloc WIN bloc 32 DI eco WI0223AX.200
WIN bloc WIN bloc 16 DO eco WI0228AX.200
WIN bloc WIN bloc 32 DI eco WI022FAX.200
WIN bloc WIN bloc 16 DI/16 DO eco WI022AAX.200