Moeller WINbloc eco PROFIBUS-DP Series - Maximum Distance;Bus Cable Lengths with Repeaters; Mixed Usage with Other Modules

Project Planning
18
05/01 AWB2700-1384GB
Maximum Distance/Bus Cable Lengths with Repeaters
Table 3: Maximum distance between 2 stations/length of bus cables,
cable type A (DIN 19245 Part 3), with 3 repeaters
Mixed Usage with Other
Modules
In addition to WIN bloc eco modules, other module types can be
integrated into the system (e.g. WIN bloc DP or certified third party
devices according to DIN 19245 Part 3), thus allowing a mixed
usage. This means that the PROFIBUS DP system is extremely
flexible and can be employed in the most difficult industrial
environments.
Other module types often require an address that does not
necessary belong to the address area of
WIN bloc eco modules and
can be coupled with WIN bloc eco modules in a PROFIBUS system
without problem (refer to the WIN bloc DP manual „ WIN bloc
PROFIBUS DP" AWB2700-1383GB). Third party devices can
operate within the address range that is not used by WIN bloc (100
- 126). Therefore, the entire address range can be used.
Baud rate (kBit/s) Max. distance between 2
stations/cable type A (m)
Max. cable length with
3 repeaters (m)
9,6
19,2
93,75
187,5
500
1500
1200
1200
1200
1000
400
200
4800
4800
4800
4000
1600
800