Master Operation Mode
104
05/01 AWB2700-1384GB
If the type files 6.0 are used, the following diagnosis is displayed:
Diagnosis in the Step 7 Program Using the DP Diagnosis
Module SFC 13
Sample Program
The following represents a sample program that is used to call the
SFC 13 (DPNRM_DG) and to store the diagnostic data of a DP slave
in data block 100 from data word 2 onwards. It must be noted that
the SFC 13 only stores valid data in the DB. This means that during
normal operation existing slave-specific diagnostic data is not reset
by SFC 13.
To Next Page
Loading...