Master Operation Mode
86
05/01 AWB2700-1384GB
Device Data Sets and
Type Files
The device data set includes all specific data of a particular I/O
module. With help of this device data set it is possible to connect
WIN
bloc eco modules to higher ranking automated devices.
h
The I/O modules are exactly described by the data in the device
data sets, however, the interpretation by the master is not
always the same. This can cause problems when configuring the
inputs/outputs in the master.
The inputs/outputs are defined for
WIN
bloc eco modules by two
hexadecimal numbers in the module identifier „Module= to".
Because the order of both the hexadecimal numbers for some
masters can be reversed, a faulty configuration of the I/O
modules can occur.
Assistance can be achieved by simply swapping the two
identifiers and subsequently saving the GSD file. This is shown in
the following example.
To Next Page
Loading...