Mounting/Dismounting
54
05/01 AWB2700-1384GB
Step 3:
The electronics module can now be removed from the base
element. Push a screwdriver between the electronics module and
the spring clip on the base element. Unlock the spring clip by lightly
bending it upwards with the screwdriver. Pull the module off the
base element.
Figure 20: Removing the electronics module
Step 4:
Lift the base element from the rail with a screwdriver. Insert a
screwdriver into the two mounting feet - one after the other - and
lift up the element with small levering movements.
Figure 21: Unlocking and removing the base element
To Next Page
Loading...