To Next PageTo Next Page
Need help?Do you have a question about the Monitronics VISTA-15PMT and is the answer not in the manual?
General| Partitions | 1 |
|---|---|
| User Codes | 48 |
| Power Supply | 16.5VAC, 25VA |
| Battery Backup | 12VDC, 4AH |
| Keypads Supported | Up to 8 |
| Dimensions | 12.5" x 12.5" x 3.5" |
| Zones | 8 hardwired zones, expandable to 48 zones with the addition of zone expanders |
Enables and configures the AVS system and related panel sounds.
Provides explanations for common system status messages and error indicators.
Details how zones can be assigned to one or two independent protection areas or a common area.
Defines the system's response to faults for each zone.
Assigns a zone to a specific partition (1, 2, or common).
Specifies the report code for a zone's events.
Sets the hardwire configuration for zones (EOL, NC, NO, etc.).
Configures the response time for hardwired zones.
Specifies the input type for zones, including wireless devices.
Details special function keys used within this programming mode.
Defines the specific system operation assigned to function key 'A'.
Overview of assigning output numbers and mapping devices.
Assigns device addresses and maps relays/powerline carrier units.
Explains the components of an output function definition.
Lists available zone types and system operations for output functions.
Procedure for assigning pre-defined zone descriptors.
Procedure for entering custom words into the system vocabulary.
Instructions for adding up to 10 installer-defined words.
Summarizes the automatic programming results of AVS quick commands.
Explains how to use an alpha keypad to mimic the 7720P tool.
Prompts for IP/GSM programming and diagnostic selection.
Details the normal and SHIFT key functions for *29 menu mode.
