– 27 –
WORKSHEET for SCHEDULES
(installer code + [#] + [6] [4];
master code can only access schedules 01-16 for VISTA-20PMT, 01-04 for VISTA-15PMT, and events 00-07
for both controls; VISTA-15PMT supports up to 8 schedules, VISTA-20PMT supports up to 32 schedules
)
No. Event Device No. Group No. Partition Start Time/ Stop Time/ Repeat Random
(see list below) for “01” events: for “02” events: for “04-06” events: Days Days (1-4) (yes/no)
enter 01-18 enter 1-8 enter 1, 2, or 3
(VISTA-20PMT)
01
02
03
04
05
06
07
08 [V15P: 11] [V15P: 5am/tue] [V15P: 4] [V15P: 1]
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32 [V20P: 11] [V20P: 5am/fri] [V20P: 4] [V20P: 1]
Events: Master/Installer Installer Only
00 = clear event 04 = forced STAY arm 10 = display custom words 8-10
01 = device on/off 05 = forced AWAY arm 11 = periodic test report
02 = user access 06 = auto disarm
03 = latch key report 07 = display “reminder”
Repeat Options: 0 = none; 1 = repeat weekly; 2 = repeat every other week; 3 = repeat every third week; 4 = repeat every fourth week
To Next Page
Loading...
Need help?
General