19
3. Local folder area
This area displays the list of preset files in the local folder of your computer.
You can save presets from your GE150 Pro on your computer by dragging a preset from the area
above into this area.
You can load presets from your computer into your GE150 Pro by dragging a preset from this area
into the area above.
You can use the right mouse button to add preset files stored in other places on your computer to
the list, delete preset files, refresh the list and open the local preset file folder.
4. Functions and system setup area
This area allows you to view Drum Machine information, switch CAB SIM bypass settings, view and
edit expression pedal mappings and open the SYSTEM settings. The submenus for EXP and SYSTEM
provide the same options as the respective menus on the GE150 Pro. (See Expression Pedal and
SYSTEM SETTINGS.)
5. Effect module area
This area displays the ON/OFF status of the effect modules for the current preset. Use the mouse to
select a module for parameter editing in the area below and to turn modules ON/OFF.
6. Effect model list
This area displays a list of the effect types that can be used with the selected module. Select a model
from the list by clicking on it list. The switch above the list turns the module ON/OFF.
7. Parameter Adjustment Area
This area shows the available parameters for the selected model. You can adjust them by clicking the
arrow buttons below the parameter names or by dragging the dials with your mouse. You will hear
all changes in real time.
Note about saving:
If you have made changes in the software window and try to switch presets in the software, you will
be prompted to save your setting changes.
However, if you switch presets by using the footswitches on the GE150 Pro, you will not be prompted
and unsaved changes will be lost!
IR file import
The GE150 Pro supports the import of up to 10 third-party IR files for Cabinet Simulations.
Obtain a 3
rd
party IR file and store it on your computer.
Select the CAB module in the GE150 Pro software screen.
The effect model list shows the CAB models already installed on your device. Scroll down to
the bottom of the list. Slots 27-36 are designated for IR file import and show "EMPTY" if no
files have been imported yet.
Click on the "+" icon and a Windows Explorer prompt will be opened. Find your stored IR file
and click "Open". Your file will be imported into your GE150 Pro and can now be used in the
CAB module in your presets.
Click the "-" icon behind an imported file to delete it.
Data backup
To backup your favorite presets on your computer, drag them from the PRESET list in the software
window to the COMPUTER list.
To restore a backup preset, drag it from the COMPUTER list to the PRESET list.
The storage slot where the preset will be stored on your device will be highlighted before you release
your mouse button.
To Next Page
