Morgana AutoFold Pro - Recommended Spares

RECOMMENDED SPARES
PART NO. DESCRIPTION
76-261 Lead - Delivery Input Connector
126-059-02 Link - Paper Guide
145-093-02 Knife Driver Pin - M8
173-57-01 Lead - Blade Position Sensor
655-015 Power Supply - 24V
173-48-01 Lead - Gap Set 1 Pot
173-47-01 Lead - Gap Set 2 Pot
174-01-03 Controller PCB Assembly + Chip
655-016 Power Supply - 48V
173-46-01 Lead - Gap Set 3 Pot
175-31-04 Input Roller Assembly - Upper
75-06-02 Touch Screen Assembly - 7” (New Controller)
175-10-04 Edge Sensor Assembly
175-11-04 Sensor Bar Assembly
175-11-05 Sensor Bar Assembly
Page 38
125-25-01 Small Stepper Driver - High Power
174-06-01 Small Stepper Driver - Low Power
174-19-01 RS232 Adaptor PCB Assy.
75-500-04 Mini ITX Motherboard - Autofold Pro
76-310 PSU Assembly - ATX12V - 300W
FOLDING
184-04-01 Fan Control PCB Assembly
76-281 Lead - Fan Assy.
76-283 Lead - Fan Assy.
76-277 Lead - Sensor
76-300 Lead - Drive Motor
76-301 Lead - Fold Knives Motor
76-305 Lead - Gap Set 1 Pot
76-306 Lead - Gap Set 2 Pot
76-307 Lead - Gap Set 3 Pot
76-304 Lead - Fold Sensor
185-10-01 Input Roller Assembly - Lower
185-14-01 Fold Roller Assembly - Fixed
185-15-01 Fold Roller Assembly - 1st
185-16-01 Fold Roller Assembly - 2nd
185-17-01 Fold Roller Assembly - 3rd