9
mGy
.
cm
2
Operation 2019-04-22
Back of support column
Press the On side (-) of the switch to turn the unit on.
The timer display and the keys on the control panel will light up.
Bottom of the inverter box
Turn the Power Switch On
(1) Before Use
R-Type WA-Type
ON
ON
The control panel enters sleep mode if left for ve minutes (default)
with no operation after the unit is turned on. At this time, the timer
display appears as shown at left.
To cancel sleep mode, press any key (except the Emission key)
on the control panel.
• In case of lightning, avoid the risk of electrical shock: stop using the equipment immediately and have the patient move away from it. Do not touch the equip-
ment or the main power cord.
Usage
* If the unit has not been used for some time, make sure it works properly before using it again.
To Next Page
Loading...
Need help?
General
