24
Operation 2018-10-22
(2) Replacement Parts
* Replace the parts as necessary depending on degree of wear and length of use.
* Order parts from your local dealer or J. MORITA OFFICE.
* Fuses F1 and F2 for R-Type located on Filter PCB.
* Fuses F1 for WA-Type located on Filter PCB.
(4) Storage
(3) Optional Parts
* For transport and storage conditions, refer to page 32.
■ Do not expose to direct sunlight frequently or for long times.
■ If the unit has not been used for a long time, make sure it works properly before using.
Code No. Description Rating Type Qu.
6112473 Main Fuse
（
For EX-2
）
F10 A 250 V Fast-acting, High Breaking Capacity,
Size: 5 × 20 mm
1
Code No. Description Rating Type Qu.
6032120 Long SSD adaptor - V080CL 1
* The fuse must be replaced by a qualied serviceman.
* Fuse shall be certied according to IEC127 or 241, or manufactured in proportion to IEC127 or 241.
• The Filter PCB remains live even if the Power Switch is turned off. Unplug the Power Cord or turn off the Power Breaker in the Power Distribution Panel before
servicing.
To Next Page
Loading...
Need help?
General
