Morita Veraview iX User Manual

17
mGy
.
cm
2
mGy
.
cm
2
Operation 2017-02-24
Before making settings, check that the Ready indicator is lit.
Exposures cannot be taken when you are in the setting mode.
To enter the setting mode, press and hold the kV key (approximately ve seconds) until you hear beeps.
The timer display will show a blinking “5” (default).
Sets the amount of time before entering sleep mode
(OFF to 60 minutes).
Press the up or down key to switch the value in increments
of ve minutes.
* The default is 5 (minutes).
Selects 60 kV, 70 kV, or previous setting.
Press this key to switch the kV indicators.
60 kV lit up: Starts with the 60 kV setting
70 kV lit up: Starts with the 70 kV setting
Both 60 kV and 70 kV lit: Starts with the setting applied at
the previous usage
Selects lm photo, digital photo, or previous setting.
Press this key to switch the setting.
Light OFF: Starts with lm radiography
Light ON : Starts with digital radiography
Blink: Starts with the setting applied at the previous usage
Up or Down Key
kV Indicator
Startup settings for radiography conditions and sleep mode time
(4) User Setting
Hold (approx. 5 seconds)

Morita Veraview iX Specifications

General

Brand	Morita
Model	Veraview iX
Category	Dental equipment
Language	English