IMPORTANT: Please ensure that the latches on the metal cover door is locked in place
before placing the battery into the radio.
8 Install the battery.
2.2.5.2
Removing the Micro CRYPTR Card
Procedure:
1 Remove the battery.
2 Flip open the metal cover door of the radio.
3 Slide to unlock the microSD card holder as indicated by the marking engraved on the microSD
card holder.
4 Flip open the microSD card holder door.
5 Remove the micro CRYPTR card from the microSD card holder
6 Close the microSD card holder and slide it to lock.
7 Close the metal cover door.
IMPORTANT: Please ensure that the latches on the metal cover door is locked in place
before placing the battery into the radio.
8 Install the battery.
2.2.6
Installing the Battery
Procedure:
1 Insert battery into the compartment as illustrated until the contacts align and the battery hooks in
place.
MN004519A01-AL
Chapter 2 : Getting Started
24
To Next Page
Loading...
Need help?
General
