3 Select desired language.
4.12.4
Tones
This field allows you to activate or deactivate the tones set.
NOTE: The radio has two tone packs: Classic Tones (default) and New Tones. Your service
provider decides which tone pack is enabled.
4.12.4.1
All Tones
You can activate/deactivate all tones.
4.12.4.1.1
Setting All Tones
Procedure:
1 From the home screen, press the Menu/OK key.
2 Select Setup→All Tones.
3 Select one of the following options:
• On – Activates all the tones.
• Off – Deactivate all the tones.
4.12.4.2
D-PTT Tones
This menu item contains the settings for the Double PTT feature.
The Double PTT feature allows you to send a tone pattern (single, double, or triple) when the radio is in
idle or the Group Call mode by pressing the PTT button twice.
After the D-PTT tone is played, you can press and hold the PTT button once again to get the
permission to talk. Otherwise, if you press the PTT button while the D-PTT tone is played, it is ignored.
After the D-PTT tone is sent, keeping the PTT button pressed results in permission to talk.
The D-PTT tone is sent over the air but is not audible on the sending radio.
4.12.4.2.1
Setting D-PTT Tones
Procedure:
1 From the home screen, press the Menu/OK key.
2 Select Setup→Tones→D-PTT Tones.
3 Select one of the following options:
• D-PTT Mode – Activates/deactivates D-PTT tone.
• Tone Style– Indicates how many times the D-PTT tone is played.
MN004519A01-AL
Chapter 4 : Main Menu
86