Motorola solutions ST7500 - Status Messages; Viewing a Status Message Number; Sending Status Messages; Targeted Status Messages

If… Then…
a Press the Menu/OK key and select Edit.
NOTE: The edit screen opens
with the template text. You are
only allowed to replace the ex-
isting text.
b Press and hold the Menu/OK key to
send the message.
4.4.7
Status Messages
The radio allows you to send two types of status messages: statuses and targeted statuses. Your
service provider determines which type is enabled on the radio.
Statuses can be sent either to a selected talkgroup or to a private number programmed by your service
provider. Targeted statuses can be sent to any talkgroup defined for the radio or to any private number
that is from the contact list or entered manually.
4.4.7.1
Viewing a Status Message Number
Procedure:
1 From the home screen, press the Menu/OK key.
2 Select Messages→Send Status.
3 Select the required status message to view the number.
4.4.7.2
Sending Status Messages
You can send status messages to either a selected talkgroup or a programmed private number. Only
one option can be enabled at a time.
Prerequisites:
• If sending statuses to talkgroups is enabled, switch to the talkgroup to which you want to send a
status message.
• If sending statuses to private numbers is enabled, no action is needed. The private number is set up
by your service provider.
Procedure:
1 From the home screen, press the Menu/OK key.
2 Select Messages→Send Status.
3 Select the required status message.
4 Press the Menu/OK key and select Send.
4.4.7.3
Targeted Status Messages
The Targeted Status Messages feature enables sending status messages to addresses that can be
selected by the user.
MN004519A01-AL
Chapter 4 : Main Menu
68