2 Select Crypto Menu→Crypto Registr.
3 Select Start Registr to start the registration.
4.16.7
Configuring Audio Settings
The Audio Settings menu is used to change the audio output for a group call when the call is
encrypted but the End-to-End Encryption is disabled.
Procedure:
1 From the home screen, press the Menu/OK key.
2 Select Crypto Menu→Audio Settings.
3 Select Encr On to enable or Encr Off to mute the encrypted audio for clear mode.
4.16.8
Setting DMO Encryption Mode
Procedure:
1 From the home screen, press the Menu/OK key.
2 Select Crypto Menu→DMO Encr Mode.
3 Enable the required mode by selecting one of the following options:
• For crypto mode bit 1, select DMO 1.
• For crypto mode bit 2, select DMO 2.
MN004519A01-AL
Chapter 4 : Main Menu
93