Motorola solutions ST7500 - Accessory (Accry) Setup; Default Setting; Selecting Default Setting; My Info

• Off – All the infrastructure information are ignored. The radio uses internal time and offset.
• Time Only – Time displayed is calculated from the offset programmed by your service
provider added or subtracted from the infrastructure time.
• Time & Offset – Time and offset are updated after receiving from the infrastructure.
4.12.6
Accessory (Accry) Setup
You can connect accessories to the audio connector at the bottom of the radio.
If you connect an accessory, the radio detects the connection and selects the IMPRES accessory
automatically.
The Accry Setup menu contains the supported accessories, represented by their Model Number as
defined by the related Audio Device Descriptor (ADD). ADD is a set of parameters in the radio that
defines the audio settings, such as gains and filters settings, for each accessory.
NOTE: To ensure proper connection of the audio accessory, fully insert the audio connector
into the bottom connector of the radio. Ensure that the thumbscrews are fully fastened before
powering on the radio. To resolve connection issues caused by partial insertion, remove and
reinsert the audio connector.
4.12.7
Default Setting
This sub-menu item resets the radio back to default settings.
4.12.7.1
Selecting Default Setting
Procedure:
1 From the home screen, press the Menu/OK key.
2 Select Setup→Def. Settings
Your radio display Reset to def. settings?. Press Menu/OK to confirm.
4.13
My Info
This sub-menu allows you to view your own private, phone, and radio info.
4.13.1
Viewing Personal Information
Procedure:
1 From the home screen, press the Menu/OK key.
2 Select My Info.
3 Select one of the following options:
• My Private Num – displays your radio private number.
• My Phone Num – displays your radio phone number.
• Radio Info – displays radio information: manufacturer, product type, ISSI, TEI, and Serial
Number.
MN004519A01-AL
Chapter 4 : Main Menu
88