68009482001 September 9, 2011
Installation: Programming the Consolette 3-15
Enter the factory default user name and password as follows:
• User Name: new-user
• Password: serial number of your Consolette with the alphanumeric characters in uppercase
(ex. 123ABC4567)
Upon successful login, the Consolette Main Menu Page will appear.
Figure 3-6. Main Menu page
3.7.2.4 Setting a new username and password
For security reasons, the Consolette’s username and password should be updated to something
other than the factory defaults. To change these parameters, first navigate to the Network
Parameters Page (Figure 3-7) by following the link from the Main Configuration Page. Input the new
username and password and then select “Store” at the bottom of the page to commit your changes.
At this time you may also wish to set other parameters, as required by the specific install. Click Back
to return to the Main Menu, and then navigate to the other parameter pages as necessary. If the
username and password were changed in the preceeding step, the authentication popup will appear.
Enter the username and password (the newly set username and password) to re-authenticate.
To Next Page
Loading...
