Motorola APX 7500 - Table 4-3. Tone Pattern; Table 4-4. Tone Sequence; Table 4-2. Pre-Defined Tone Tables

September 9, 2011 68009482001
4-8 Feature Operation: Wireline Interface
Supported guard tone (both HLGT and LLGT) frequencies include: 2100Hz, 2175Hz, 2300Hz, and
2325Hz. The supported range of function tone frequencies include: 450Hz to 2050Hz in 100Hz
increments. The frequencies can be mapped to functions in the Consolette codeplug. See section
3.7.3.1 for information on setting up the tone table. The Consolette supports pre-defined tone tables
and also allows the user to customize a tone table with any desired assignment of functions to tones.
The pre-defined tables currently supported are:
Table 4-2. Pre-defined Tone Tables
The functions represented by the function tones are any of the following:
Table 4-3. Tone Pattern
Based on the general tone pattern specified above, as well as the available function tones, the
Consolette supports the following particular tone sequences:
Table 4-4. Tone Sequence
Function Tone Standard Table CentraCom II
No Mode
Select
Mode 1 Only No Mode 1
2175 Hz Guard Tone/
PTT
Guard Tone/
PTT
Guard Tone/
PTT
Guard Tone/
PTT
Guard Tone/
PTT
2050 Hz Monitor Monitor Monitor Monitor Monitor
1950 Hz Mode 1 Select Mode 1 Select No effect Mode 1 Select Mode 2 Select
1850 Hz Mode 2 Select Mode 2 Select No effect No effect Mode 2 Select
1750 Hz Mode 7 Select Mode 7 Select No effect No effect Mode 7 Select
1650 Hz Mode 8 Select Mode 8 Select No effect No effect Mode 8 Select
1550 Hz Mode 5 Select Mode 5 Select No effect No effect Mode 5 Select
1450 Hz Mode 6 Select Mode 6 Select No effect No effect Mode 6 Select
1350 Hz Mode 3 Select Mode 3 Select No effect No effect Mode 3 Select
1250 Hz Mode 4 Select Mode 4 Select No effect No effect Mode 4 Select
1150 Hz Secure Coded
Select
Mode 5 Select Secure Coded
Select
Secure Coded
Select
Secure Coded
Select
1050 Hz Secure Clear
Select
Mode 6 Select Secure Clear
Select
Secure Clear
Select
Secure Clear
Select
Function Tone Meaning
CHAN x Select channel x, where x is 1 through 16
CODED Enable encryption
CLEAR Disable encryption
MON Enable receiver monitor
Operation Tone Sequence
Channel HLGT-CHAN
Coded HLGT-CODED
Clear HLGT-CLEAR