56
Possible Radio Wide/ Used in
Parameter Default Settings Per Channel Conv/Trunk Description
Secure No Yes/No Radio Wide Both Notifies radio that Secure
Equipped Module is present
XL IC Present No Yes/No Radio Wide Both Notifies radio that Secure
Module contains XL IC
Secure/Clear Select Select/ Per Channel Conv Sets channel to Clear-Only
Strapping Clear/ or Secure-Only or user
Secure Selectable
Strapping Clear Select/ Per Channel Trunk Sets channel to Clear-Only
Clear/ or Secure-Only or user
Secure Selectable
XL Transmit Enable Enable/ Per Channel Conv Enables TX XL operation or
Disable disables for CFB
Scan Select Non-XL&XL Non-XL/ Per Channel Conv Selects between Non-XL and
Non-XL&XL XL Scan Unsquelch Duration
Scan Holdoff Both Both/ Per Channel Conv Scan for Clear or Secure or
Strapping Clear Only/ Both on a particular
Secure Only channel
RX Modulation 2-Level Rx Auto Rx/ Per Channel Conv Tells radio to look for 2&4
2-Level Rx -level signals or 2-level
signals only
Proper Code Enabled Enabled/ Per Channel Conv Enables RX proper code
Detect (Conv) Disabled detection
Proper Code Disabled Enabled/ Per Channel Trunk Enables RX proper code
Detect (Trunk) Disabled detection
TX Clear Enabled Enabled/ Radio Wide Both Enables alert tone when
Alert Tones Disabled PTT is pressed while in
the Clear mode
Periodic Keyfail Enabled Enabled/ Radio Wide Both Enables a Keyfail Alert
Alert Tone Disabled Tone to sound periodically
in a key-fail condition
Non-XL Scan 275mS 0-6375ms Radio Wide Both The time after an activity
Unsquelch detect that radio will wait
Duration on channel without an
unsquelch in Non-XL mode
XL Scan 875mS 0-6375ms Radio Wide Both The time after an activity
Unsquelch detect that radio will wait
Duration on channel without an
unsquelch in XL mode
Table 3. RSS Secure Parameters
To Next Page
Loading...
