28 April 20, 2007 6809511A13-O
Disassembly V3 ’06
Removing and Replacing the Transceiver Board Assembly
1. Remove the battery cover, battery, SIM, rear housing and antenna module as
described in the procedures
.
2. Lift the transceiver board assembly out of the front housing with the
disassembly tool. See Figure 11.
3. To replace, insert the transceiver board assembly into the rear housing.
4. Carefully and gently press the transceiver board into position and until it snaps
into place.
5. Replace the antenna assembly, rear housing, SIM, battery, and battery cover
as described in the procedures.
G
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
070592o
Figure 11. Removing the Transceiver PC board Assembly
Disassembly tool
Transceiver PC Board
Assembly
To Next Page
Loading...
