32 April 20, 2007 6809511A13-O
Disassembly V3 ’06
Removing and Replacing the CLI Lens
1. Remove the battery cover, battery, SIM, rear housing, antenna, transceiver
board assembly, flip assembly cover as described in the procedures.
2. Slide the flat end of the plastic disassembly tool, between the lens and the
display bezel.
3. Slowly move the plastic disassembly tool along the sides of the CLI lens (see
Figure 15).
4. Carefully lift up the CLI Lens from the display module assembly.
5. Carefully use the plastic tool remove any remaining glue.
070622o
Figure 15. CLI Lens Removal
G
Do not use any kind of liquid or spray to remove the remaining glue.
CLI lens
To Next Page
Loading...
