Motorola MOTORAZR V3 - Removing and Replacing the Display Module Assembly

6809511A13-O April 20, 2007 35
Level 1 and 2 Service Manual Disassembly
Removing and Replacing the Display Module Assembly
1. Remove the battery cover, battery, SIM, rear housing, antenna, transceiver
board assembly, flip assembly cover, and CLI assembly, as described in the
procedures.
2. Using a flat tip tweezer, carefully and gently lift up the camera grommet from
the camera module assembly (see Figure 19).
3. Set the camera grommet aside for re-assembly.
G
The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when
handling.
070598o
Figure 19. Removing the Camera Grommet