128
System Update
You can pick how you would like to update the time and the
date displayed on the radio:
1. To turn off the automatic update from the infrastructure
Setup > Time & Date > System Update > Off. All the
broadcasted informations are ignored. The terminal uses
internal time and offset.
2. To turn on the automatic update only for time Setup
> Time & Date > System Update > Time Only. The time
displayed is calculated from the offset programmed by your
Service Provider added or subtracted from the network
time.
3. To turn on the automatic update Setup > Time & Date
> System Update > Time & Offset. Time and offset are
updated after receiving broadcasted information.
Display Features
The display menu controls how the
display appears.
From the main menu, select Setup
>Display
:
• Text Size – sets size of text on the
display.
• Screen Saver – covers the MTM800E display after the
MTM800E stays idle for a pre-programmed period of time
(if configured by your Service Provider).
• Backlight
– a backlight lights the display and keypad
when you make or receive a call, or press keys or buttons.
Backlight can be set to Automatic or Disabled.
• Wallpaper
– changes the wallpaper that appears on the
idle screen.
Text Size: Standard
Screen Saver
Backlight: Auto
Wallpaper: Off
Done
Display
Change
To Next Page
Loading...
