Motorola MTM800E - Selecting Groups for DMO Calls

42
Receiving a Group Call in Idle Screen with Scan Off
You can receive a group call from the
selected talkgroup or from the associated
ATG only.
Your MTM800E will receive the Group
Call.
Receiving a Group Call in Idle Screen with Scan On
With Scan On, you can receive a group
call from the scan list you set up, in
addition to receiving a group call from the
selected talkgroup or from the associated
ATG.
Receiving the scan call functions as
receiving an associated ATG or selected call in scan off is
possible, except for the following:
For incoming call alert, see settings in the Tones menu option
(page 123).
When receiving a Group call, you will hear a “New Group Call”
tone (if configured by your Service Provider).
Private ID
without alias
Private ID
with alias
OR
Group In Use
ID:124
TG4
Folder
Optns
Group In Use
ID:Ziutek
TG4
Folder
Optns
Group In Use
ID:David
TG4
Folder
Optns
Group In Use
ID:David
TG4
End
Optns