5-4 MTP700/MTP750 Portable Radios / Basic Service Manual TEST SETUP & TESTING
Receiver Tests
1. Simulate Base Station (registration)
2. RSSI
Transmitter Tests
1. Power Profiles
2. Power Burst (Control Range)
3. Tx Burst Timing Error
4. Tx Frequency Error
5. Vector Error RMS, Peak and Residual
Call Processing Tests
1. Talk Back
2. Call to Mobile
Duplex Test
1. Digital Duplex Test (Tx)
Measurement Capabilities:
Bar chart display for Rx BER, Tx Power, Frequency Error, Vector Error RMS, Power
analyser, Spectrum analyser, Vector analyser, Vector Diagrams.
6. Digital Duplex
Test (Tx)
RF Gen Level Private/Phone
Mode
4 digit random
number & “Send”
-90dBm
Burst Power 28-31.5dBm
Timing Error <=0.25 Symbols
Frequency
Error
-/+ 80Hz
Vector Error Max 10% RMS,
Max 30% Peak,
Max 5% Residual
No. Test Name Test Setup Radio Setup Test Conditions Limits
To Next Page
Loading...
