MAINTENANCE MTP700/MTP750 Portable Radios / Basic Service Manual 6 - 11
Service Aids
The following table lists the service aids recommended for working on the radio. While all
of these items are available from Motorola, most are standard workshop equipment items
and any equivalent item capable of the same performance may be substituted for the
item listed.
Motorola Part No. Description Application
PMLN4510_ Programming Stand Pocket for connecting to radio/Programming/Flash-
ing with CPS.
FLN9636_ Programming Cable Cable to connect PC to programming stand.
PMLN4504_ Data Cable Cable for data transfer.
RLN4510_ Battery Eliminator Reg-
ulator, 7.5V
Regulator to power radio via battery eliminator
cable.
0180305J49 Battery Eliminator
Cable
Interconnects radio to power supply.
5880384G68 Antenna Adapter SMA-BNC
6686263Z02 Chassis Opener Tool to separate chassis from front cover housing.
0180320B16
6680321B81
6680321B56
Torx Screw Driver Kit
(T6,8,10,15,25)
Torx Bit
Insert Bit extra long
Tool to remove torx screws in radio.
- Phillips Screw Driver Tool to remove speaker retainer.
- Flat-head, Penknife-
size Screw Driver
Tool to remove display retainer.
To Next Page
Loading...
