REPLACEMENT PARTS AND KITS MTP700/MTP750 Portable Radios / Basic Service Manual A - 1
APPENDIX A
REPLACEMENT PARTS AND KITS
Servicing MTP700/MTP750 Portable Units
Service for the portable units is based on the substitution method; a faulty part is replaced
by a working one, providing quicker service to the customer. For example, if the trans-
ceiver board is faulty, it is replaced. If the portable requires more complete testing or serv-
icing than that is available at field level, it is sent to your nearest Radio Service Center;
where it is serviced.
The MTP700/MTP750 portables are programmed at the factory. They cannot be tuned at
the field service level.
Level 1 and Level 2 Maintenance
This manual covers Level 1 and Level 2 Maintenance: at Level 1 Maintenance you
replace the transceiver and/or accessories and send the faulty transceiver and/or acces-
sories to a higher level of maintenance; at Level 2 Maintenance a faulty kit is replaced.
For Latin America Level 1 and Level 2 Maintenance contact your local Motorola CGISS
office for information. For details, please refer to relevant Support Depots on page 1-3 to
1-5.
Level 3 Maintenance
The level 3 maintenance can only be done at the factory. Contact your local Motorola
CGISS for information.
Replacement Parts
Damaged parts should be replaced with identical replacement parts. For complete infor-
mation on ordering required parts and kits, contact your local customer service represent-
ative.
To Next Page
Loading...
