Motorola MTP700 - DMO Test; IFR 2968 Test Setup; How to Configure the IFR 2968 Manual Test Screen; Radio Configuration for DMO

TEST SETUP & TESTING MTP700/MTP750 Portable Radios / Basic Service Manual 5-13
DMO Test
IFR 2968 Test Setup
Note: Terms for 380-430 MHz radio in brackets [ ].
1. Press the “System” soft key.
2. Press “TETRA Direct” soft key.
3. Press “Setup” soft key.
4. Press “Channel Plan” soft key, press “TETRA870+ODM” [TETRA41ODM] for R2.
5. Press “DM Tx Mode” soft key, press “discontinue” soft key.
How to Configure the IFR 2968 Manual Test Screen
1. Press the “Manual” soft key.
2. Press “Channel” soft key, thereafter enter “0600=870 MHz” [0882=412.0625 MHz] for
R2 and press “Channel” soft key.
3. Press “Expected Power” soft key, enter 30.0 dBm/1.0 W.
4. Press “Burst Type” soft key and “Normal” soft key.
Radio Configuration for DMO
Modify the radio for DMO option by carrying out the following sequence:
1. Turn ON the radio.
2. Press the “Menu” key.
3. Press the “Navigation” key and select mode “network”, press “OK” soft key.
4. Select “OPERMODE”, and press “OK” soft key.
5. Select “DIRECTMODE” soft key and press “OK” soft key.