MAINTENANCE MTP700/MTP750 Portable Radios / Basic Service Manual 6 - 7
6. Push the Talkgroup switch shaft back into radio housing to slide chassis away.
7. Gently remove flex from the socket connector.
8. Lay the chassis down. Rotate the front cover backward and slightly away from the
chassis.
9. Lift the latches on the main circuit board to release the flexes from their connectors.
Figure 6-4 Unlatch Flex Connectors
Socket Connector
Latches
Flex Connectors
UC Flex
Circuit Tail
Talkgroup Switch
To Next Page
Loading...
