Motorola MTP850 - DMO Private Call; Emergency Group Call; Exiting DMO

6 - 12 MTP850 TETRA Handportable Terminal / Basic Service Manual MAINTENANCE
Removing and Installing the Vibrator
Recommended tool: mini flat-tip screwdriver.
To remove the vibrator
1. Remove the back housing. Refer to “Removing and Installing the Top Cover
and Back Housing” on page 6-9.
2. Turn the back housing up side down and, using the screwdriver, remove the
vibrator from its chamber inside the back housing.
To install the vibrator
1. Carefully push the vibrator into its chamber in the back housing.
2. Install the back housing.
Figure 8 Vibrator Removal and Installation