MAINTENANCE MTP850 TETRA Handportable Terminal / Basic Service Manual 6 - 23
Removing and Installing the Keypad
Recommended tools: no tool is required.
To remove the Keypad
1. Remove the Internal Assembly. Refer to “Removing and Installing the Internal
Assembly” on page 6-15.
2. Remove the keypad board from the unit.
To install the Keypad
1. Install the keypad. Verify that all the keys are properly inserted into their
dedicated holes.
2. Install the Internal Assembly. Refer to “Removing and Installing the Internal
Assembly” on page 6-15.
Figure 19 Keypad Removal and Installation
To Next Page
Loading...
