105
GPS Location Service
• The longitude expressed in degrees, minutes, and
seconds
• The number of satellites used to calculate the location. In
general, more satellites make for better accuracy. The
maximum is twelve satellites.
To calculate your location again, press Rfrsh.
For the users from United Kingdom and
Ireland there are two letters (for UK) or 1
letter (for IRL) displayed. This feature needs
to be enabled by the Service Provider.
It may take your terminal several minutes to
complete the process of determining your location. During
this time, a message usually appears on your terminal’s
display stating:
• Insufficient Visible Satellites, or
• Insufficient Visible Data
For tips on getting the best location calculation, see
“Enhancing GPS Performance” on page 102.
The Position screen displays the updated information.
To cancel a location calculation before it is completed:
Press Back to return to the previous screen.
Each time approximate location of your terminal is
calculated, the latest location information is stored in your
terminal and remains there even when your terminal is
powered off. You will see this information the next time you
view the Position screen.
If you received a terminal call or alert while attempting to
determine your location, the Position screen will disappear,
but your terminal will continue attempting to determine its
location. If it is successful, the new location information will
be displayed the next time you view the Position screen.
Position
<Time>
<LetterPosition>
<Latitude>
<Longitude>
<Tracked satellites>
Rfrsh Back
To Next Page
Loading...
