32
• Pressing Send key
If the call type is “PABX” or “Phone” or “Private”, then
pressing initiates PABX or Phone or full duplex private
call accordingly. If not allowed a special indication is given to
the user.
Incoming Calls During Dialing
The radio remains affiliated to the last Talk Group and
receives any group calls. An incoming call is indicated to the
user and the dialing process is interrupted. A non-emergency
call does not suspend dialing but the user is able to hear the
tone of incoming call. When the radio receives a private or
phone call, radio indicates and gives to the user the option to
reject or accept it. If the user accepts the call, dialing process
ends. When the user rejects it the user will be back in the
dialing process.
Entering Emergency Mode During Dialing
The dialing process stops if during it the user tries to go to the
emergency mode. An incoming Long Text Message during
dialing; an Long Text Message is indicated and this interrupts
the dialing process.
Incoming Store & Forward message during dialing
Store & Forward message is indicated and interrupts the
dialing process.
Changing Call Type
By dialing from the idle screen the user is given the possibility
to change the Type of the Call.
Modifying the Type of Call
The infrastructure can modify the type of call you started.
For example, you might start a half-duplex Private Call, and
the infrastructure could modify the call to a Group Call.
To Next Page
Loading...
