Motorola MTP850 - Sending Store & Forward Message; Using the Inbox

120
Set Covert Mode to On
Select On. All tones are set to off, and the backlight and the
LED are disabled immediately. The group audio is routed to
the earpiece.
Set Covert Mode to Off
Select Off. All settings for tones, backlight and audio are
restored. The LED is enabled and the message Covert
Mode Off is shown.
Set Vibrate
From the Security sub-menu select > Covert Mode
>Vibrate.
•Select Off to disable all vibrations.
•Select On to restore all vibrations.
Setup
From the main menu, select Setup.
This sub-menu allows you to change your
MTP850 configuration: vibrate, ring style, set
volume, language, data setup, audio, tones,
display and time & date.
Setting the Vibrate Feature
This sub-menu allows you to determine if
your MTP850 vibrates, or rings, or both
vibrates and rings when receiving a call.
To change the Vibrate setting:
1. From the main menu, select Setup
>Vibrate.
2. Scroll through the settings.
3. Select required setting, and press Back to exit.
The Vibrate settings mentioned above apply for all calls. Your
MTP850 can associate different Vibrate settings for different
calls.
To make specific Vibrate settings for different calls:
Setup
Vibrate
Ring Style
Set Volume
Language
Data Setup
Select Back
Vibrate
Vibe & Ring
Vibe Only
Ring Only
Details...
Select Back