Motorola MTP850 - Adding Secondary to the List of Text Entry Modes; Selecting the Text Entry Method and Language

136
• There is a selected, inactive scan list (Scan List 1 is
Not Active). Scanning is off.
• Scanning is off and the Network List is selected
(Network List Not Active).
• There is a selected, active scan list. Scanning is on.
Then, the display will show the Scan Lists
sub-menu.
2. Scroll to the required list and press View to
see the groups that belong to the list.
3. Scroll to the required group and press
View to view the group status (attached or
not attached) and priority (if pre-programmed).
4. Press Back to return to the previous display. Then, if
required, press
. You can select to delete the group
from the scan list or change its priority.
Editing Scan Lists
1. From the main menu,
select More...
> Group Setup
> Scan > Scan Lists.
2. Scroll to the required
scan list. Press View to see the groups used in the scan list.
Press Back to return to the previous display.
3. To edit/view the contents of a scan list, press
.
4. In the List Optns sub-menu, scroll to the required option
and press Select.
• Rename the active scan list. (For details on text editor
use, see “Writing Text” on page 167). Enter a new name
(alias) and press Ok. The display shows the new
setting.
If the Network List is empty, it will not be displayed.
The options below cannot be used for the Network List.
If the Network List is empty, it will not be displayed.
Scan Lists
Scan List 1
Network List
View Back
MENU
Scan Lists
Scan List 1
Scan List 2
Network List
View Back
List Optns
Rename
Capacity
Clear List
Add Group
Edit
Select Back
MENU