73
Phone and PABX Call
1. Press and hold the required key for a few seconds. Your
MTP850 will display the number and dial it.
2. To hang up, press .
DTMF Overdial
If set up by your Service Provider, DTMF
allows you to communicate with an
automated answering device (for example,
the voice mail or answering machine) during
an on-going call.
While in an on-going call, press the DTMF
keys (0-9, *, #). When pressed, the DTMF key will sound a
tone and the entered digit will be displayed on the screen.
Recent Calls List
Select the number from the recent call list. See “Recent
Calls” on page 140.
Calling a Number in a Message
See “Calling a Number in a Message” on page 159.
on receiving a call
See “Dialing On receiving a Call” on page 69.
Answering a Phone or PABX Call
1. The MTP850 switches to the incoming Phone/PABX Call.
2. To answer the incoming call, press or any other key if
programmed (except Home/End/On-Off key).
3. To end the call, press .
If the called person or the infrastructure end the call, the Call
Ended message is displayed.
If dialing via one-touch key is enabled, one-touch dial is disabled
(see page 25).
For call alert, see settings in the Vibrate menu option
(page 120) and the Tones menu option (page 125)
.
Phone In Use
12345*#67890
<animation>
To Next Page
Loading...
