25
Getting Started
set to “Screen Saver On”. Please check with your Service
Provider.
Programmable Keys (0-9, * and #)
The MTP850 supports the one-touch feature that allows you
to select/activate commonly used features by pressing and
an assigned key. Your Service Provider should program the
numeric keys with the relevant features.
The following table lists the programmable features and their
availability in specific MTP850 states/modes. For detailed
information on the features, see the relevant section in the
user guide.
Feature Description
Talkgroup Switch Switches to a specific talkgroup
Previous Talkgroup
Switch
Switches to the previous talkgroup
(even if the operation mode was
different)
Talkgroup Scan Toggles on/off the Talkgroup Scan
function (TMO only)
DMO/TMO Toggles between DMO and TMO
Status Message Sends a dedicated status message to a
dedicated address
Text Message Template Sends a predefined/user defined
template to a dedicated address
Call Dial (Private,
Phone, PABX)
Initiates a call to a predefined entry in
the contact list
Vertical Flip Display Toggles on/off vertical flip
Transmit Inhibit (TXI) Toggles between activated and
deactivated TXI Mode.
Screen Saver Activates screen saver.
Backlight Adjustment Toggles on/off backlight
Covert Mode Toggles on/off covert mode
If via one-touch numeric key is enabled, one-touch dial is
disabled (see page 72).
To Next Page
Loading...
