Motorola MTP850 - Selecting DMO Group Call via Gateway

57
DMO Group Call
Gateway/Repeater Selection
Use the DMO Config sub-menu for setting
the Gateway and Repeater options.
1. Press Optns to enter the options menu in
DMO:
2. Scroll to Config, and press Select.
Selecting DMO Group Call MS to MS
To change from gateway or repeater mode to MS - MS mode
(DMO terminal to terminal call):
1. Press Optns, scroll to Config and press
Select.
2. Scroll to MS - MS and press Select. The
following message to be displayed for a few
seconds: MS - MS Will Be Used.
Selecting DMO Group Call via Gateway
While in DMO, proceed as follows to choose a gateway to set
up a call via Gateway for the selected talkgroup:
1. Press Optns, scroll to Config and press Select.
2. Scroll to Gateway and press Select.
DMO Folder 1
Police
Hello
Optns Contcs
Folder
TG by Folder
TG by abc
Trunked Mode
Config
1 MS - MS
2 Gateway
3 Repeater
4 GW + Rep
1 Automatic
2 Specific
1 Automatic
2 Specific
DMO Options sub-menu
Folder
TG by Folder
TG by abc
Trunked Mode
Config
DMO Options
Select Back
Select Back
Config
MS - MS
Gateway
Repeater
GW + Rep