20
Signal Strength (DMO)
Indicates an incoming Direct Mode Group Call.
Direct Mode
Displayed when the MTP850 is in Direct Mode.
DMO Gateway
Indicates that gateway is selected. The icon has
three states:
Solid — while the MTP850 is synchronised with
the gateway.
Flashing — while the MTP850 is not
synchronised or during attachment.
No icon — during a terminal to terminal and
repeater c
all.
DMO Repeater
Displayed when the repeater option in DMO is
selected. This icon has three states:
Solid — while the terminal has detected the
repeater (i.e., when the terminal receives a
presence signal).
Blinking — while the terminal has not detected
the repeater or during attachment.
No icon — during a terminal to terminal and
gateway call.
General Icons
All Tones Off / Duplex & Simplex Ring Muted
Indicates that all alert tones are off in the MTH800
or both Simplex Ring volume is set to 0 and
Duplex Ring volume is set to 0.
Simplex Ring Muted
Indicates that Simplex Ring volume is set to 0 and
Duplex Ring volume is set to more then 0.
Duplex Ring Muted
Indicates that Duplex Ring volume is set to 0 and
Simplex Ring volume is set to more then 0.
Vibrate On
Indicates that the MTP850 will vibrate to alert you
of an incoming call.
Status Icon Description
To Next Page
Loading...
