Motorola MW800 Series User Manual

16
PWR For connecting the power cord from the vehicle battery.
Use a standard Motorola power cable with a 15-Amp fuse.
CPU Cable Connects the display to the CPU box.
USB Each port connects a USB 1.1 device such a keyboard,
mouse, etc.
Right-side Components
Figure 9. 8.4” Display Control Buttons Figure 10. 12.1” Display Control Buttons
Power Button Turns the MW800 power ON and OFF. This button
functions identically as the Power Button on the front panel
of the CPU box. Be aware, the main power switch on the
rear CPU panel, must be switched on before using the
Power Button.
Standby Button Use this button to go into a low power consumption state
(Standby mode). In Standby mode, the workstation enters a
Workst ation Power
Button / Indicator
page 4
Temperature
Indicator
page 4
Communi cation
Indicator
page 4
On S cr een Di s play
(OSD) Button /
Indicator page 6
Su sp end Mode
Button / Indicator
page 5
Backl ight On / Off &
Indication Intens ity
Cont r ol
Button / Indicator
page 5
Bri ghtness & Volum
e
up / down Control
page 6
W
orkstation Power
Indicator
Workstation Power Button
Temperature
Indicator
Communication Indicator
Suspend Mode
Screen Back-light On/Off &
Buttons illumination Level
Volume up/down
RGB Indicator
On Screen Display (OSD)
Menu
Suspend Indicator
Screen Back-light
Indicator
Brightness up/down

Motorola MW800 Series Specifications

General

Brand	Motorola
Model	MW800 Series
Category	Desktop
Language	English