Motorola MW800 Series User Manual

MW800 User’s Guide 29
Tips for F5217A Installation
• Use the AUX 26 pin cable Motorola p/n 3087563V93 for interface to the vehicle
to access to vehicle speed and direction outputs.
Reading the vehicle speed signals
• Connect the “+” terminal of the vehicle speed signals to the AUX port pin1 (black
wire).
• Connect the “-” terminal of the vehicle speed signals to the AUX port pin2
(brown wire).
Reading the Forward /Backward drive direction signals
• Connect the “+” terminal of the vehicle forward/backward drive direction signals
to the AUX port pin 3 (red wire).
• Connect the “-” terminal of the vehicle forward/backward signals to the AUX port
pin 4 (orange wire).
• If the vehicle forward/backward signals connection is not utilized, connect AUX
port pin 3 (red wire) to the 5VDC and AUX port pin 4 (orange wire) to the GND.
NOTE: 5VDC signal is available on AUX port pin 25 (blue wire 24 AWG), GND
signal is available on AUX port pin 11 (gray wire 28 AWG)

Motorola MW800 Series Specifications

General

Brand	Motorola
Model	MW800 Series
Category	Desktop
Language	English