MW800 User’s Guide 41
Reset options:
Factory reset Reset all settings to a factory default and re-synchronize on
input signal. Accept/Reject menu will appear if this option
chosen.
Reset Color Reset RGB settings.
Reset Image Resynchronize on input signal.
Reset OSD Reset OSD position, timeout and lock settings.
Brightness& Contrast:
Brightness Brightness adjustment
Contrast Contrast adjustment
Color tuning:
Reset Color Reset color settings.
RGB Adjust Adjust Red/Green/Blue color space.
Color Temperature Choose color scheme. Default is RGB.
Natural Color Fine-tune human skin palette. This option is especially
useful in video applications.
Image adjustment:
Auto Adjust Resynchronize on input signal.
Clocks Adjust Adjust pixel-sampling clock relative to input clock.
Usually, this mechanism is automatic; manual clock
adjustment is not recommended.
Phase Adjust Adjust pixel-sampling clock relative to input signal phase.
May be useful when connecting the MW800 XGA display
to a new input source. Note, that shadows surrounding
vertical lines are symptom of insufficient phase adjustment.
Horizontal &
Vertical Position Generally, no complicated geometry adjustments are
needed for LCD. Slight horizontal or vertical position
issues may require tuning.
OSD settings:
OSD Time Out Specify how long to wait for user input before exiting
OSD. The options are 5 seconds, 30 seconds, 60 seconds,
and 120 seconds. The default is 5 seconds.
OSD Lock Out Lock OSD menus from user input.
OSD position Choose preferred menu position on screen.
Exit options:
Smiley face Accept and exit.
Unhappy face Reject and exit.
To Next Page
Loading...
Need help?
General
