Motorola One Fusion+ User Manual

Charge phone
How to charge
Connect to charger
Your phone doesn't support wireless charging. Use a USB charger or connect it to a power source with a
USB cable.
1. Connect your phone to the charger that came with your phone, or to a charger that is compatible with
your phone.
Other chargers, including laptops, can charge more slowly.
2. Insert the plug into an electrical outlet.
See if your phone is charging
When the phone is off and charging, you’ll see the outline of a battery and a percentage. If the battery is
completely discharged, this will not appear until the phone has received the minimum voltage required to
boot.
When the phone is on and charging, you’ll see in the status bar.
Tips for charging phone
•
You can use your phone while charging. To charge faster, don't use your phone while charging.
•
If you can't turn the phone on while it's charging, wait until it receives enough voltage before turning it
on.
•
When the battery gets low, the phone sends a notification.
•
Use Battery Saver mode when the battery is low.
•
You can turn off charging sounds.
Settings : Battery 184

Motorola One Fusion+ Specifications

General

Processor	Qualcomm Snapdragon 730G
RAM	6 GB
Storage	128 GB
Battery	5000 mAh, Non-removable
Operating System	Android 10, upgradable to Android 11
Weight	210 g
Colors	Moonlight White, Twilight Blue
SIM	Dual SIM (Nano-SIM, dual stand-by)
Network	GSM / HSPA / LTE
Bluetooth	5.0, A2DP, LE
USB	USB Type-C 2.0
Fingerprint Sensor	Rear-mounted
Other Features	FM radio, 3.5mm jack
Rear Camera	8 MP (ultrawide), 5 MP (macro), 2 MP (depth)
Front Camera	16 MP